How Much Does a Door Cost in 2025? Pantry Doors, Pocket Door Hardware, and Weyerhaeuser Edge Gold

Budget $500–$900 per interior door installed in 2025. That's the answer I give after eight years of sourcing doors for multifamily and light-commercial jobs. The door slab is the cheapest part. The frame, hardware, labor, and the surprises hiding in the rough opening are where the real money goes.

I'm a procurement manager at a 25-person building products distributor. I manage roughly $1.3M per year in doors, panels, and finish hardware, and I've documented every order in our cost tracking system since 2017. This article is the breakdown behind that number.

What the Door Cost Breakdown Really Looks Like

For a standard 30-inch prehung interior door with a passage lockset and a finish carpenter on site, here's what I see in most 2025 quotes:

• Door unit: $120–$350
• Hinges, lockset, strike plate: $80–$200
• Shims, fasteners, trim, caulk: $50–$120
• Installation labor: $200–$450
• Total installed: $500–$900

Prehung units usually come with a primed jamb and three hinges. That's the baseline. When you compare quotes, make sure each one lists the same jamb width, hinge type, and lock bore. I've seen two 'identical' door quotes differ by $200 because one included a beefier jamb and the other did not.

If you only need a slab door and you plan to hang it yourself, $60–$250 is realistic for hollow-core. Solid-core slabs start around $150 and go past $400. But the 'how much does a door cost' answer is not a slab price unless you already have a square frame. Based on distributor quotes and published catalogs as of February 2025, the installed range above is the number to use for planning. To be fair, a $60 hollow-core slab can be the right call in a laundry room. But once you add hinges, a lockset, and a primed jamb, the installed cost still lands closer to $300.

Why 'Weyerhaeuser Edge Gold Price' Matters for Your Door Budget

If you searched 'Weyerhaeuser Edge Gold price,' you're probably working from a spec that names their premium panel line. It shows up in cabinet work, millwork, and custom door packages because the panel edges are consistent enough to paint without a lot of extra prep. Edge Gold is a panel brand, not a door model, and the price only makes sense when you specify the exact grade and format.

In Q3 2024, we quoted Weyerhaeuser Edge Gold in the 3/4-inch 4x8 format from two distributors. The prices came in at $78 and $91 per sheet, wholesale. That's not a public list price. A retail counter order will run higher, and a pallet order from a stocking distributor will run lower. Most buyers focus on the per-sheet number and miss the delivery charge, which added $45–$120 to those quotes depending on the distributor.

What vendors won't tell you: the first quote on a branded panel is usually based on volume assumptions. Our first quote from one distributor was $93 per sheet. After we committed to a six-pallet buy, the price dropped to $81. The same pattern shows up in prehung door quotes.

For context, Weyerhaeuser's 2023 net sales were $7.642 billion, according to their 2023 annual report. I mention that because, next to their total volume, a single sheet of Edge Gold is a rounding error. That's why local distributor pricing often beats a direct manufacturer quote on small orders. It's not that the product quality changes—it's that the channel and volume define the price.

Pantry Doors: Priced Lower Than People Think, But the Catch Is Real

A pantry door is usually a 28-inch or 30-inch prehung unit. My recent quotes for a simple painted pantry door, installed, run $350–$650. The slab itself often costs less than $150. The catch is swing direction. A pantry door that swings into a shelf is a $200 labor fix.

Most buyers ask about the door color and wood grain. The better questions are: which way should it swing, and how deep is the jamb? Pantry walls are often thicker because of shelving, so a standard 4-9/16-inch jamb may not work. We hit this on a project last fall. The quote looked great until the install crew discovered the wall was 5-1/2 inches. That one extra measurement would have saved us a morning of shimming.

Pocket Door Hardware: Don't Price the Hardware Without the Frame

Pocket door hardware is the easiest budget item to underestimate. The hardware kit itself is $40–$250. The pocket frame is another $60–$180. Installation runs $250–$500. Total installed pocket door cost: $350–$900, and that's without a door if you're reusing an old one.

If you're deciding between a pantry swing door and a pocket door, the cost gap is smaller than you think. A swing pantry door installed runs $350–$650. A pocket door installed runs $600–$1,100. The pocket door usually wins when aisle space is tight. That's a space trade-off, not a price trade-off.

Here's something vendors won't tell you: 'really quiet' and 'soft-close' are not the same feature. We priced a basic aluminum kit at $48 and a soft-close steel kit at $210 before labor. The difference is worth it in a bedroom or a home office. For a pantry, the $48 kit is usually fine.

The bigger trap is compatibility. Pocket door hardware requires a frame pocket that matches the door thickness and weight. If you pick a solid-core door and the hardware is rated for hollow-core, you'll get a door that sags within a year. That's a rework cost, not a maintenance cost. Check the rating before you order, not after. 5 minutes of verification beats 5 days of correction.

The 14-Point Checklist That Cut Our Door Rework in Half

I built a 14-point door order checklist after I once specified 24 'left-hand' doors and the supplier's left-hand definition was opposite from the opening side. That mistake cost $1,100 in restocking plus a two-week schedule hit. We were using the same words but meaning different things. Since then, the checklist has saved us an estimated $8,000 in potential rework.

Every door order goes through these checks before the PO is sent:

• Rough opening width, height, and diagonal measurements
• Swing direction viewed from the finished side
• Jamb width vs. actual wall thickness
• Hinge side and lockset bore position
• Hardware prep compatibility: hinges, lockset, and strike
• Pocket door length vs. door height, not just door width

The checklist isn't complicated, but it has to be followed. We make the field lead initial each line before the purchase order goes out. That simple procedure stopped the 'I thought someone else checked it' problem.

The door itself is rarely the failure point. It's the 10 minutes you didn't spend checking the opening. A checklist is the cheapest insurance I use. The 'cheap' option that doesn't match the opening gets expensive fast.

Where My Numbers Stop Applying

These ranges assume standard conditions: existing interior openings, normal 2x4 or 2x6 walls, a finish carpenter charging typical regional rates, and no structural changes. Change any of those and the estimate moves.

If you're buying doors for new construction, you may be at the low end because the crew is already on site. If you're retrofitting an existing home, add 15–30% for cutting, patching, and trim work.

• Fire-rated or custom doors: add 30–100%
• Pocket door installation in an existing wall: add $400–$800
• High-end hardware like mortise locks or custom pulls: add $100–$500
• Coastal or high-wind bracing details: labor can run 30% higher
• If your carpenter charges more than $100/hour, use the top of my range or above

Granted, my Weyerhaeuser Edge Gold pricing is from specific Q3 2024 purchases, not a published rate. Your distributor will have a different number, and it will change when lumber markets move. Treat any price quote as a starting point, not a promise.

The next time someone asks 'how much does a door cost?', the most useful answer is around $650 installed. The more useful question is: what does the rough opening look like? Check that first. That's where the money goes.